To sew the bag you’ll need:
2 squares – 18 x 18 “
but you can make it any size.
1 1/4 meters. Serge,
According to the tape, or – cut into 2 equal parts
1. Cut 2 squares fabric Coordination 18 “x 18”.
2. Place the right sides together
and sew around all four edges,
leaving “Opening 3-4 to turn.
3. Turn the square right outside.
Stitch close to the edge,
closing the opening.
4. Fold the square into three parts,
as it shown on the picture.
Adjust if necessary to make this measurement and …..
….. This measurement is the same. Repeat on both sides.
5. Find the center and mark with pins.
Stitch 1 “on both sides of the center mark.
(The line on the right side of the center mark)
(The line on the left side of the center mark)
These stitching lines show the bottom of the bag.
6. Fold the piece in half
with folded sides inside.
7. Stitch on both sides, using the “seam 1/8.
8. Take in the package, at the bottom.
Pull the corners.
Stitching lines that you made in step 5
create a manual for cross-linking through the corner.
Stitch on both corners, as shown in Fig.
This will create a wedge so that your bag has a flat bottom.
9. Remove the inside out
10. Fold the triangular flap
(Shown in the picture above)
down and sew 5/8 “from the folded top edge,
to form a housing.
11. Using one of the pieces of twill
through the body from the right edge of the bag,
from the left side and back to the other side of the bag –
both ends come out of the right edge.
Use the second piece of pinching
and repeat the process
to the left side and back through
so they are both located on the left side.